Chemistry of Crosslinking

Crosslinking is the process of chemically joining two or more molecules by a covalent bond. The technique, often called bioconjugation when referring to its use with proteins and other biomolecules, is an essential component of many proteomics methods, including creation of detectable probes for Western blotting and ELISA and strategies for investigating protein structure and interactions.

Crosslinking reagents (or crosslinkers) are molecules that contain two or more reactive ends capable or chemically attaching to specific functional groups (primary amines, sulfhydryls, etc.) on proteins or other molecules. This article describes the chemistry and variety of crosslinkers that exist.

Page Contents:

Overview of Crosslinker Structure and Chemistry:
Crosslinker Reactive Group Chemistries:

Learn More…

Overview of Crosslinking

Crosslinking Applications

Overview of Crosslinker Structure and Chemistry

Protein Functional Groups

Despite the complexity of protein structure, including composition and sequence of 20 different amino acids, only a small number of protein functional groups comprise selectable targets for practical bioconjugation methods. In fact, just four protein chemical targets account for the vast majority of crosslinking and chemical modification techniques:

  • Primary amines (–NH2): This group exists at the N-terminus of each polypeptide chain (called the alpha-amine) and in the side chain of lysine (Lys, K) residues (called the epsilon-amine). Because of its positive charge at physiologic conditions, primary amines are usually outward-facing (i.e, on the outer surface) of proteins; thus, they are usually accessible for conjugation without denaturing protein structure.
  • Carboxyls (–COOH): This group exists at the C-terminus of each polypeptide chain and in the side chains of aspartic acid (Asp, D) and glutamic acid (Glu, E). Like primary amines, carboxyls are usually on the surface of protein structure.
  • Sulfhydryls (–SH): This group exists in the side chain of cysteine (Cys, C). Often, as part of a protein’s secondary or tertiary structure, cysteines are joined together between their side chains via disulfide bonds (–S–S–). These must be reduced to sulfhydryls to make them available for crosslinking by most types of reactive groups.
  • Carbonyls (–CHO): Ketone or aldehyde groups can be created in glycoproteins by oxidizing the polysaccharide post-translational modifications (glycosylation) with sodium meta-periodate.
Learn More…

Antibody Crosslinking, Labeling and Immobilization Sites

Covalent Immobilization Methods for Affinity Ligands

Protein Glycosylation

Crosslinker Reactive Groups

A number of chemical reactive groups have been characterized and used to target the main kinds of protein functional groups. Many different crosslinking reagents can be synthesized when different combinations of two are more of these reactive groups are incorporated into one molecule. When combined with different sizes and types of chemical “backbones” (called spacer arms because they define the distance between respective reactive ends), the number of possible crosslinking compounds is enormous.

Popular crosslinker reactive groups for protein conjugation. Reactivity class titles link to specific sections of this article. Italicized chemical group names are not specifically discussed in this article.
Reactivity Class Chemical Group
Carboxyl-to-amine reactive groups Carbodiimide (e.g., EDC)
Amine-reactive groups NHS ester
Pentafluorophenyl ester
Hydroxymethyl phosphine
Sulfhydryl-reactive groups Maleimide
Haloacetyl (Bromo- or Iodo-)
Aldehyde-reactive groups
i.e., oxidized sugars (carbonyls)
Photoreactive groups
i.e., nonselective, random insertion
Aryl Azide
Hydroxyl (nonaqueous)-reactive groups Isocyanate
Learn more… buy this book:

Bioconjugate Techniques, Greg Hermanson
Bioconjugate Techniques,
2nd Edition (2008)
Greg T. Hermanson,
Academic Press, Inc.,
1202 pages.

Selecting Crosslinkers

Crosslinkers are selected on the basis of their chemical reactivities (i.e., specificity for particular function groups) and other chemical properties that affect their behavior in different applications:

  • Chemical specificity refers to the reactive target(s) of the crosslinker’s reactive ends. A general consideration is whether the reagent has the same or different reactive groups at either end (termed homobifunctional and heterobifunctional, respectively; see below).
  • Spacer arm length refers to the molecular span of a crosslinker (i.e., the distance between conjugated molecules). A related consideration is whether the arm is cleavable (i.e., whether the linkage can be reversed or broken when desired).
  • Water-solubility and cell membrane permeability of a crosslinker affect whether it can permeate into cells and/or crosslink hydrophobic proteins within membranes. These properties are determined by the composition of the spacer arm and/or reactive group.
  • Spontaneously reactive or photoreactive groups in a crosslinker affect whether it react as soon as it is added to a sample or can be activated at a specific time by exposure to UV light.
View Products…

Crosslinkers at a Glance
(Table of all crosslinkers)

Crosslinker Selection Guide
(Interactive guide)

Homobifunctional and Heterobifunctional Crosslinkers

Crosslinkers can be classified as homobifunctional or heterobifunctional.

Homobifunctional crosslinkers have identical reactive groups at either end of a spacer arm, and generally they must be used in one-step reaction procedures to randomly “fix” or polymerize molecules containing like functional groups. For example, adding an amine-to-amine crosslinker to a cell lysate will result in random conjugation of protein subunits, interacting proteins and any other polypeptides whose lysine side chains happen to be near each other in the solution. This is ideal for capturing a “snapshot” of all protein interactions but cannot provide the precision needed for other types of crosslinking applications. For example, when preparing an antibody-enzyme conjugate, the goal is to link one to several enzyme molecules to each molecule of antibody without causing any antibody-to-antibody linkages to form. This is not possible with homobifunctional crosslinkers.

Homobifunctional crosslinker example. DSS is a popular, simple crosslinker that has identical amine-reactive NHS-ester groups at either end of a short spacer arm. The spacer arm length (11.4 angstroms) is the final maximum molecular distance between conjugated molecules (i.e., nitrogens of the target amines). DSS, an example of an amine-reactive, homobifunctional crosslinker

Heterobifunctional crosslinkers possess different reactive groups at either end. These reagents not only allow for single-step conjugation of molecules that have the respective target functional groups, but they also allow for sequential (two-step) conjugations that minimize undesirable polymerization or self-conjugation. In sequential procedures, heterobifunctional reagents are reacted with one protein using the most labile group of the crosslinker first. After removing excess nonreacted crosslinker, the modified first protein is added to a solution containing the second protein where reaction through the second reactive group of the crosslinker occurs. The most widely-used heterobifunctional crosslinkers are those having an amine-reactive succinimidyl ester (i.e., NHS ester) at one end and a sulfhydryl-reactive group (e.g., maleimide) on the other end. Because the NHS-ester group is less stable in aqueous solution, it is usually reacted to one protein first. If the second protein does not have available native sulfhydryl groups, they can be added in a separate prior step using sulfhydryl-addition reagents.

Sulfo-SMCC, an example of a popular amine-to-sulfhydryl heterobifunctional crosslinker.
Heterobifunctional crosslinker example. Sulfo-SMCC is a popular crosslinker that has an amine-reactive sulfo-NHS-ester group (left) at one end and a sulfhydryl reactive maleimide group (right) at the opposite end of a cyclohexane spacer arm. This allows for sequential, two-step conjugation procedures.

Learn More…
Overview of Crosslinking

Crosslinking Applications

In vivo Crosslinking

Browse Products…

Crosslinking Reagents

General Reaction Conditions

In many applications, it is necessary to maintain the native structure of the protein complex, so crosslinking is most often performed using near-physiologic conditions. Optimal crosslinker-to-protein molar ratios for reactions must be determined empirically, although product instructions for individual reagents generally contain guidelines and recommendations for common applications.

Depending on the application, the degree of conjugation is an important factor. For example, when preparing immunogen conjugates, a high degree of conjugation is desired to increase the immunogenicity of the antigen. However, when conjugating to an antibody or an enzyme, a low-to-moderate degree of conjugation may be optimal so that biological activity of the protein is retained.

The number of functional groups on the protein’s surface is also important to consider. If there are numerous target groups, a lower crosslinker-to-protein ratio can be used. For a limited number of potential targets, a higher crosslinker- to-protein ratio may be required. Furthermore, the number of components should be kept low or to a minimum because conjugates consisting of more than two components are difficult to analyze and provide less information on spatial arrangements of protein subunits.

Learn More…
Immunogen Preparation for Antibody Production
View Products…
Maleimide-activated HRP Conjugation Kit

Reactive Group Chemistries:

Carboxyl-to-Amine Crosslinker Chemistries:

Carbodiimides (EDC and DCC)

EDC carbodiimide crosslinker for carboxyl-to-amine crosslinkingEDC and other carbodiimides are zero-length crosslinkers; they cause direct conjugation of carboxylates (–COOH) to primary amines (–NH2) without becoming part of the final crosslink (amide bond) between target molecules.

EDC crosslinking reactions must be performed in conditions devoid of extraneous carboxyls and amines. Acidic (pH 4.5 to 5.5) MES buffer (4-morpholino-ethane-sulfonic acid) is most effective, but phosphate buffers at pH ≤ 7.2 are also compatible with the reaction chemistry. N-hydroxysuccinimide (NHS) or its water-soluble analog (Sulfo-NHS) is often included in EDC coupling protocols to improve efficiency or to create a more stable, amine-reactive intermediate (see next section).

Because peptides and proteins contain multiple carboxyls and amines, direct EDC-mediated crosslinking usually causes random polymerization of polypeptides. Nevertheless, this reaction chemistry is used widely in immobilization procedures (e.g., attaching proteins to a carboxylated surface) and in immunogen preparation (e.g., attaching a small peptide to a large carrier protein).

Learn More…

Carbodiimide Crosslinker Chemistry and Applications

View Products…

EDC (also called EDAC)


NHS and Sulfo-NHS

Amine-Biotin Reagents
for labeling carboxyls with EDC

Amine-Reactive Crosslinker Chemistries:

N-Hydroxysuccinimide Esters (NHS Esters)

NHS ester crosslinker group for amine crosslinkingNHS esters are reactive groups formed by EDC-activation of carboxylate molecules (see previous section). NHS ester-activated crosslinkers and labeling compounds react with primary amines in slightly alkaline conditions (pH 7.2-8.5) to yield stable amide bonds. The reaction releases N-hydroxysuccinimide (MW 115), which can be removed easily by dialysis or desalting.

NHS-ester crosslinking reactions are usually performed in phosphate buffer at pH 7.2-8.0 for 0.5 to 4 hours at room temperature or 4°C. Primary amine buffers such as Tris (TBS) are not compatible because they compete for reaction; however, in some procedures, it is useful to add Tris or glycine buffer at the end of a conjugation procedure to quench (stop) the reaction.

Sulfo-NHS esters are identical to NHS esters except that they contain a sulfonate (–SO3) group on the N-hydroxysuccinimide ring. This charged group has no effect on the reaction chemistry, but it does tend to increased the water-solubilty of crosslinkers containing them. In addition, the charged group prevents Sulfo-NHS crosslinkers from permeating cell membranes, enabling them to be used for cell surface crosslinking methods.

Learn More…

Amine-reactive Crosslinker Chemistry and Applications

View Products…

NHS ester Crosslinkers

NHS ester Crosslinkers

NHS-Biotin Reagents


Imidoester crosslinker group for amine crosslinkingImidoester crosslinkers react with primary amines to form amidine bonds. To ensure specificity for primary amines, imidoester reactions are best done in amine-free, alkaline conditions (pH 10), such as with borate buffer.

Because the resulting amidine bond is protonated, the crosslink has a positive charge at physiological pH, much like the primary amine which it replaced. For this reason, imidoester crosslinkers have been used to study protein structure and molecular associations in membranes and to immobilize proteins onto solid-phase supports while preserving the isoelectric point (pI) of the native protein. Although imidoesters are still used in certain procedures, the amidine bonds formed are reversible at high pH. Therefore, the more stable and efficient NHS-ester crosslinkers have steadily replaced them in most applications.

Learn More…

Amine-reactive Crosslinker Chemistry and Applications

View Products…

Imidoester Crosslinkers:
DMA (dimethyl adipimidate)
DMP (dimethyl pimelimidate)
DMS (dimethyl suberimidate)

Sulfhydryl-Reactive Groups:


Maleimide crosslinker group for sulfhydryl crosslinkingMaleimide-activated crosslinkers and labeling reagents react specifically with sulfhydryl groups (–SH) at near neutral conditions (pH 6.5-7.5) to form stable thioether linkages. Disulfide bonds in protein structures (e.g., between cysteines) must be reduced to free thiols (sulfhydryls) to react with maleimide reagents. Extraneous thiols (most reducing agents) must be excluded from maleimide reaction buffers, because they will compete for coupling sites.

Short homobifunctional maleimide crosslinkers enable disulfide bridges in protein structures to be converted to permanent, irreducible linkages between cysteines. More commonly, the maleimide chemistry is used in combination with amine-reactive NHS-ester chemistry in the form of heterobifunctional crosslinkers that enable controlled, two-step conjugation of purified peptides and/or proteins.

Learn More…

Sulfhydryl-reactive Crosslinker Chemistry and Applications

View Products…

Maleimide Crosslinkers

Maleimide Crosslinkers

Maleimide-Biotin Reagents


Iodoacetyl crosslinker group for sulfhydryl crosslinkingMost haloacetyl crosslinkers contain an iodoacetyl or a bromoacetyl group. Haloacetyls react with sulfhydryl groups at physiologic to alkaline conditions (pH 7.2 to 9), resulting in stable thioether linkages. To limit free iodine generation, which has the potential to react with tyrosine, histidine and tryptophan residues, perform iodoacetyl reactions in the dark.

Learn More…

Sulfhydryl-reactive Crosslinker Chemistry and Applications

View Products…

Haloacetyl Crosslinkers

Iodoacetyl-Biotin Reagents

Pyridyl Disulfides

Pyridyldisulfide crosslinker group for sulfhydryl crosslinkingPyridyl disulfides react with sulfhydryl groups over a broad pH range to form disulfide bonds. As such, conjugates prepared using these crosslinkers are cleavable with typical disulfide reducing agents, such as dithiothreitol (DTT).

During the reaction, a disulfide exchange occurs between the –SH group of the target molecule and the 2-pyridyldithiol group of the crosslinker. Pyridine-2-thione (MW 111; λmax 343nm) is released as a byproduct that can be monitored spectrophotometrically and removed from protein conjugates by dialysis or desalting.

Learn More…

Sulfhydryl-reactive Crosslinker Chemistry and Applications

View Products…

Pyridyldithiol Crosslinkers

PDPH (carbohydrate-reactive)


Carbonyl-Reactive Groups:


Hydrazide crosslinker group for glycoprotein crosslinkingCarbonyls (aldehydes and ketones) can be produced in glycoproteins and other polysaccharide-containing molecules by mild oxidation of certain sugar glycols using sodium meta-periodate. Hydrazide-activated crosslinkers and labeling compounds will then conjugate with these carbonyls at pH 5 to 7, resulting in formation of hydrazone bonds.

Hydrazide chemistry is useful for labeling, immobilizing or conjugating glycoproteins through glycosylation sites, which are often (as with most polyclonal antibodies) located at domains away from the key binding sites whose function one wishes to preserve.

Learn More…

Carbonyl-reactive Crosslinker Chemistry and Applications

View Products…

Sodium meta-Periodate

Hydrazide Crosslinkers

Hydrazide Biotin Reagents


Alkoxyamine crosslinker group for glycoprotein crosslinkingAlthough not currently as popular or common as hydrazide reagents, alkoxyamine compounds conjugate to carbonyls (aldehydes and ketones) in much the same manner as hydrazides.

Learn More…

Carbonyl-reactive Crosslinker Chemistry and Applications

View Products…

Alkoxyamine Biotin Reagents

Photoreactive Groups:

Aryl Azides

Phenyl azide crosslinker group for photoreactive crosslinkingPhotoreactive reagents are chemically inert compounds that become reactive when exposed to ultraviolet or visible light. Historically, aryl azides (also called phenylazides) have been the most popular photoreactive chemical group used in crosslinking and labeling reagents.

When an aryl azide compound is exposed to UV light, it forms a nitrene group that can initiate addition reactions with double bonds or insertion into C-H and N-H sites or can undergo ring expansion to react with a nucleophile (e.g., primary amine). Reactions can be performed in a variety of amine-free buffer conditions to conjugate proteins or even molecules devoid of the usual functional group “handles”.

Photoreactive reagents are most often used as heterobifunctional crosslinkers to capture binding partner interactions. A purified bait protein is labeled with the crosslinker using the amine- or sulfhydryl-reactive end. Then this labeled protein is added to a lysate sample and allowed to bind its interactor. Finally, photo-activation with UV light initiates conjugation via the phenyl azide group.

Learn More…

Photoreactive Crosslinker Chemistry and Applications

View Products…

Photoreactive Crosslinkers

Photoreactive Biotinylation Reagents

UV Lamps for


Diazirine crosslinker group for photoreactive crosslinkingDiazirines are a newer class of photo-activatable chemical groups that are being incorporated into crosslinking and labeling reagents. The diazirine (azipentanoate) moiety has better photostability than phenyl azide groups, and it is more easily and efficiently activated with long-wave UV light (330-370 nm).

Photo-activation of diazirine creates reactive carbene intermediates. Such intermediates can form covalent bonds through addition reactions with any amino acid side chain or peptide backbone at distances corresponding to the spacer arm lengths of the particular reagent. Diazirine-analogs of amino acids can be incorporated into protein structures by translation, enabling specific recombinant proteins to be activated as the crosslinker.

Learn More…

Photoreactive Crosslinker Chemistry and Applications

View Products…

SDA (NHS-Diazirine)
Diazirine Crosslinkers

Photoreactive Amino Acids
for In vivo labeling and

Chemoselective Ligation Groups:

Staudinger Reagent Pairs

Azide Phosphine crosslinkers for Staudinger ligationChemoselective ligation refers to the use of mutually specific pairs of conjugation reagents. Staudinger ligation reagents are pairs of metabolic or chemical labeling compounds that have azide and phosphine groups, respectively. In other words, these reactive groups recognize each other but not any natural or endogenous biomolecules in typical samples. Thus, when respective pairs of target biomolecules are labeled with these two groups, they will conjugate to one another with high specificity when combined. This specialized form of crosslinking is most often used for in vivo metabolic labeling


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s